Roadster Door Hinge Screws I need several of the screws that hold the door hinge to the car body. The screws I’ve bought from vendors don’t fit. Does anyone know what size these screws are ? There are three screws on each hinge.
Thanks - Jim |
Re: Roadster Door Hinge Screws Need to know what year roadster,
1928-1929 roadsters use 1-4-28 for door hinge to cowl 1930-1931 roadsters use 5/16-24 for door hinge to cowl Steve |
Re: Roadster Door Hinge Screws Steve - thanks - the car is a ‘31 roadster.
Jim |
Re: Roadster Door Hinge Screws got mine from Brattons and they fit fine.
|
Re: Roadster Door Hinge Screws If you got the screws from a reputable supplier and for the correct year, make sure the holes were not re-tapped for different thread or cross threaded. If you have the old ones that came out, check the thread count.
|
Re: Roadster Door Hinge Screws I just ordered another set of screws. One screw is missing on the lower hinge, and I can’t get the others out. Unfortunately, the lower hinge is loose, so I hope I can tighten it up with a new screw.
|
Re: Roadster Door Hinge Screws Just did the hinges on my 31 Roadster a short time ago. Used some original screws and some new ones from Bratton's and they worked fine. Make sure you use the cup washers and internal lock washers as well.
|
All times are GMT -5. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.