Tach hook up. I have the chance to get a cable drive tach. Where do you attach the cable to.
Is there a drive that attached to Dizzy?.Any help would be great. Thanks George |
Re: Tach hook up. I used this tachometer. https://www.westach.com/product-page/2ct32-6v Tom Endy wrote about it a while back. It simply connects to both coil terminals.
|
Re: Tach hook up. 1 Attachment(s)
Quote:
Here is a typical mechanical tach drive on a model B race engine. |
Re: Tach hook up. Thanks Fellas looks like Westach is the way to go without spending a ton of time and money .
|
Re: Tach hook up. Quote:
I hope it works out for you. :-) Sent from my iPhone using Tapatalk |
Re: Tach hook up. You can also do a mechanical from the generator shaft if you are willing to add the stub shaft and coupling bits. Lots of old tractors used this setup. Getting the ratios right might be interesting but it's period correct.
|
Re: Tach hook up. Barnnone51, I have a new Westach, bracket and light kit I will sell. PM me Greg
|
All times are GMT -5. The time now is 11:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.