|
aluminum housed oil pump 2 Attachment(s)
First one I have ever seen. Bought off Epay about 10 years ago for $13, including shipping. Has an A1 on one side and a 4 on the other. Just wanted to share, and see if anybody has information. Thanks Ron
|
Re: aluminum housed oil pump Ron I also have one that is brand new somewhere that I to purchased off eBay. Sorry I’m of no help as I have not used it.
|
Re: aluminum housed oil pump there are lots of aluminum hydraulic pumps, but, i like iron
|
Re: aluminum housed oil pump Keep the oil clean and it should work good for a long time.
|
Re: aluminum housed oil pump 1 Attachment(s)
Just guessing.
Looks like you would probably have to drill a hole in the normal pan on a Ford 8BA V8. https://www.fordbarn.com/forum/attac...1&d=1609889962 |
Re: aluminum housed oil pump The aluminium one looks just like the iron one I took out of the 59 series flatty. The 59 type pickup housing would bolt straight on. It wouldn't need any mods for use on a 59 series (or older) motor.
What is the short bodied pump shown above, off? 8BA? |
Re: aluminum housed oil pump Quote:
|
Re: aluminum housed oil pump the short one is 8ba missing the pickup tube
|
Re: aluminum housed oil pump The body of that aluminum pump looks exactly like a '36 to '41 pump, but the pick-up is certainly unusual.
|
| All times are GMT -5. The time now is 01:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.