The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   My friend Ken’s Model A -V8 (https://www.fordbarn.com/forum/showthread.php?t=281300)

Digger 05-19-2020 12:58 PM

My friend Ken’s Model A -V8
 

4 Attachment(s)
He came by yesterday on the maiden voyage with the 53 Merc Motor with supercharger and 3 deuces, she was singing!

1930artdeco 05-19-2020 01:49 PM

Re: My friend Ken’s Model A -V8
 

Must be brand spanking new because he did not leave any rubber behind��.

Mike

Vern 05-19-2020 01:53 PM

Re: My friend Ken’s Model A -V8
 

Nice period ride! When I was in my first year in college I found a similar Tudor down at Antique Automotive in San Diego, with a 289 Ford V-8. I could not convince my dad that I needed that Tudor to drive to school. I ended up with a Datsun truck...alas.
20 years later I got the little blue roadster. Take that Dad!

1931 flamingo 05-19-2020 02:15 PM

Re: My friend Ken’s Model A -V8
 

Nice ! ! What's he using for a supercharger??
Paul in CT

Y-Blockhead 05-19-2020 02:26 PM

Re: My friend Ken’s Model A -V8
 

Looks like an Eaton. I was thinking (fantasizing??) about using one on a Banger... :p:p

McMimmcs 05-19-2020 07:54 PM

Re: My friend Ken’s Model A -V8
 

You would likely get more attention on the Hot Rod forum!

Ranchero50 05-19-2020 08:11 PM

Re: My friend Ken’s Model A -V8
 

Quote:

Originally Posted by Y-Blockhead (Post 1889541)
Looks like an Eaton. I was thinking (fantasizing??) about using one on a Banger... :p:p

I have one from a 3.8 Buick that will be mated to mine eventually. Going to try and keep it down low next to the cam.

GPierce 05-19-2020 08:27 PM

Re: My friend Ken’s Model A -V8
 

When I was 16 I would have lusted for ride like that.

katy 05-19-2020 08:37 PM

Re: My friend Ken’s Model A -V8
 

If'n that's a "53 Merc Motor" then howcum it's got the pre '49 heads on it?

Digger 05-19-2020 09:36 PM

Re: My friend Ken’s Model A -V8
 

I clu;do be wrong about it being a 53 Merc Motor, I am certainly not an expert. I will ask him what SC is on there

M2M 05-19-2020 09:48 PM

Re: My friend Ken’s Model A -V8
 

Tell Ken he's a bad boy and that we want the car returned to original. The old car hobby isn't a democracy.


Jack Shaft 05-19-2020 11:09 PM

Re: My friend Ken’s Model A -V8
 

5 million means there is enough for everybody..

flatheadrick 05-19-2020 11:30 PM

Re: My friend Ken’s Model A -V8
 

Katy, the pre 49 heads fit the later 8BA block, also notice the location of the distributor. Rick

garyjohn 05-20-2020 09:10 AM

Re: My friend Ken’s Model A -V8
 

Too many of this cars are being screwed up by hot roding them. Just my 2 cents worth

katy 05-20-2020 10:51 AM

Re: My friend Ken’s Model A -V8
 

Quote:

Originally Posted by flatheadrick (Post 1889703)
Katy, the pre 49 heads fit the later 8BA block, also notice the location of the distributor. Rick

Missed that :):)

Ruth 05-20-2020 12:14 PM

Re: My friend Ken’s Model A -V8
 

Quote:

Originally Posted by garyjohn (Post 1889800)
Too many of this cars are being screwed up by hot roding them. Just my 2 cents worth

Not knowing the history on this car I don't know how you can honestly say that.

A friend has a similar car that he "built". It would never be a Model A again, altho the body looks better than a lot of Model As running around. When he got his it was an old rusted out body. He fabbed the door skins and most of the lower sheet metal from the belt line down, taking measurements off of his pristine stock '30 Tudor.

He built the frame, had seats made, installed a "Hot Rodded 4 Banger. It looks like a '30 Tudor, but there is not much Ford left so I don't think he "screwed" anything up.

Yes, there are a fair amount of Model As being Hot Rodded. But guess what? It is their car.

Just my 2 cents worth.

Flathead 05-20-2020 06:07 PM

Re: My friend Ken’s Model A -V8
 

My avatar roadster was built one piece at a time from flea market parts and a very poor body that was patched up. No Model A's were damaged to build it. I also have a stock 30 Tudor that will remain stock.

Jack Shaft 05-20-2020 06:22 PM

Re: My friend Ken’s Model A -V8
 

Doesn't matter what you do with your property.My only wish is that you finish what you start,so many get torn apart and forgotten. It a lot like a puppy,some get all giddy when they get them but don't give a thought to the long term commitment they are making.

History 05-20-2020 09:58 PM

Re: My friend Ken’s Model A -V8
 

Quote:

Originally Posted by Vern (Post 1889523)
Nice period ride! When I was in my first year in college I found a similar Tudor down at Antique Automotive in San Diego, with a 289 Ford V-8. I could not convince my dad that I needed that Tudor to drive to school. I ended up with a Datsun truck...alas.
20 years later I got the little blue roadster. Take that Dad!

Exactly^^^^^^ dads are stupid!!!!! Wait,,,,,, I'm a dad now. :(

RandyinUtah 05-21-2020 12:35 AM

Re: My friend Ken’s Model A -V8
 

I visited a Model A friend just last week who is attempting to put a V-12 Lincoln in a 31 Victoria. He was in the process of adding the extra 13 inches to the frame. Knowing my friend he will get it completed and add it to his collection of stock Model As. Hu


All times are GMT -5. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.