Cheap Reproduction Head? 4 Attachment(s)
This head was in a truckload of parts that I bought. It looks like a cheap reproduction made in the 40's. The casting is very poor quality. Do any of you experts know what it is?
Thanks, Dave |
Re: Cheap Reproduction Head? A lot of aftermarket parts were made and on many of our cars.
|
Re: Cheap Reproduction Head? Is there a diamond on the front passenger side just below the hole for the long stud?
Don't remember a casting date like yours so probably not ford made. |
Re: Cheap Reproduction Head? I think that is an aftermarket part - I've seen a lot of them on cars that were last worked on in the 50s and 60s. Haven't really seen a lot of them at swap meets though.
|
Re: Cheap Reproduction Head? Manny, Moe, and Jack cast those up in Freds garage, They thought they would become millionaires!
|
Re: Cheap Reproduction Head? Could be a J.C. Whitney jewel!
|
Re: Cheap Reproduction Head? I have one that was on my car. I have since replaced it with a 5.5 head. Works just fine as it is a replacement for a stock head. Like you said cast probably in the late 30-40’s.
Mike |
Re: Cheap Reproduction Head? April 12, 1940! :) Just because the selling price was maybe low, does not mean it was cheaply made. Pre WW2 so could have been a good grade of iron used.
|
All times are GMT -5. The time now is 06:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.