The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Rear axle key orientation (https://www.fordbarn.com/forum/showthread.php?t=294994)

HDowse 02-25-2021 05:09 PM

Rear axle key orientation
 

I pulled the rear drums on the '29 coupe a few days ago, cleaned everything up but I forgot to check how the axle key fits back in the axle groove. I have the ones Snyder's sells with the somewhat elongated bevel. Going to write it down this time.....inside the drum...

kwisor 02-25-2021 05:17 PM

Re: Rear axle key orientation
 

the tapered end faces down (what you are calling the elongated bevel) and facing the backing plate. be sure the it is at the end of the shaft out side hub will go on easier i just finished doing my brakes.
kevin

HDowse 02-25-2021 06:10 PM

Re: Rear axle key orientation
 

Thanks, Kevin, that makes sense since the key way tapers up towards the backing plate end. Now I can put everything back together....

kwisor 02-26-2021 09:40 AM

Re: Rear axle key orientation
 

you are welcome did you get them on
kevin

HDowse 02-26-2021 07:03 PM

Re: Rear axle key orientation
 

Yes, they went on just fine this afternoon, thanks.


All times are GMT -5. The time now is 08:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.