The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   What revs at 60MPH (https://www.fordbarn.com/forum/showthread.php?t=271960)

Kurt in NJ 11-03-2019 09:11 AM

Re: What revs at 60MPH
 

Quote:

Originally Posted by Dick Steinkamp (Post 1816992)
50 year old bald tires at 67 MPH?

Please let me know when you are driving the car. I don't want me or my family near you.

I work on modern cars, next time you are stopped in traffic and there are cars on each side, in front, and back one of those cars has a much more serious problem than old near bald tires ---- tires,suspension,brakes that the owner knows about and declined the repair ---tires showing 2 layers of cord, inch or more play in ball joint ---siezed brake calipers, rusted brake pipes with one line crimped off ----I see this work declined every day, but the radio, sunroof get fixed!

Ruth 11-03-2019 11:14 AM

Re: What revs at 60MPH
 

Quote:

Originally Posted by Kurt in NJ (Post 1816965)
Anytime I try to drive 45 i end up over 50----the second day after I rebuilt it I knew it would go 67, I have original stock head, no overdrive, have driven over 65 all day...

What rear end ratio are you running? With stock gearing (3.78's), at 67 your engine would be spinning ~3000 RPM (on paper). More in real life.

Quote:

Originally Posted by 30 Closed Cab PU (Post 1817051)
I thought 2200 - 2400 was max safe RPM on an A stock motor.
Yes, No?

That is similar to what I have heard... At 50 MPH my engine is at 2200 RPM. (Using Tach and GPS).

GRutter 11-03-2019 01:15 PM

Re: What revs at 60MPH
 

You would also need to consider 28-28 vs 30-31 (21" vs 19") wheel diameter, as the rolling diameter of the tire will have an impact on speed at any given RPM with the same ratio rear

Tom Wesenberg 11-03-2019 09:34 PM

Re: What revs at 60MPH
 

Quote:

Originally Posted by 30 Closed Cab PU (Post 1817051)
I thought 2200 - 2400 was max safe RPM on an A stock motor.


Yes, No?

I would say yes, and for more speed, I'd install 3.27 gears or overdrive.
40 to 45 is an enjoyable speed, but you need to find some good Wisconsin roads for that. Too many fool drivers in Minnesota.

Ruth 11-04-2019 12:16 AM

Re: What revs at 60MPH
 

Quote:

Originally Posted by GRutter (Post 1817250)
You would also need to consider 28-28 vs 30-31 (21" vs 19") wheel diameter, as the rolling diameter of the tire will have an impact on speed at any given RPM with the same ratio rear

According to Lucas Classic Tires a 28/29 tire (4.40/4.50-21) is a ¼" taller than a 30/31 tire (4.75/5.00-19). I don't think you would see much impact.

30 Closed Cab PU 11-04-2019 01:25 PM

Re: What revs at 60MPH
 

Quote:

Originally Posted by Tom Wesenberg (Post 1817426)
I would say yes, and for more speed, I'd install 3.27 gears or overdrive.
40 to 45 is an enjoyable speed, but you need to find some good Wisconsin roads for that. Too many fool drivers in Minnesota.



My Truck had 4.11, could not keep up with others, so had 3.54 installed.


I like a relaxed slower pace and drive anywhere from 30 - 45 mph max. Live in a small town of about 20,000 people in Wisc, stay away from Interstates, busy state and county roads as much as possible. I tense up and do not enjoy those roads. Some times go out exploring, getting lost, and use Google Maps on my cell phone to find my way home.

ryanheacox 11-04-2019 01:54 PM

Re: What revs at 60MPH
 

I like this website for calculating RPMs and speed at a given RPM. http://www.grimmjeeper.com/gears.html



Like others, I don't think I'd want to cruise at 60 for many reasons. I did see if my car with it's new engine could do it and yes, it can do 65 but I didn't keep it there more than 30 seconds.



In my rural area cruising at 50-55 is safely doable and my car seems perfectly happy to do it. That's about 2200-2400RPM.

Jim Mason 11-04-2019 07:15 PM

Re: What revs at 60MPH
 

1 Attachment(s)
From 32-37 service bulletins

Dick Steinkamp 11-04-2019 07:53 PM

Re: What revs at 60MPH
 

Quote:

Originally Posted by Jim Mason (Post 1817782)
From 32-37 service bulletins

Too small to see.

Jim Mason 11-04-2019 08:19 PM

Re: What revs at 60MPH
 

1 Attachment(s)
....

NZ28ModelA 11-07-2019 03:50 AM

Re: What revs at 60MPH
 

That is a fantastic chart..

Thank you all for your responses.

Steve N.Z.


All times are GMT -5. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.