The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixed. (https://www.fordbarn.com/forum/showthread.php?t=281771)

Mart 05-29-2020 07:03 AM

Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixed.
 

Hello. Welcome to a new video from Mart's Garage. This week I tackle a problem with my radiator. It's been running too high a pressure and has bowed the top tank. Follow along as I not only fix the leaks, but add strengthening ties to better contain the pressure. The problem was caused by a faulty pressure cap, overpressuring the system, but as this rad was not originally built to be pressurised, I still added the ties. Ok, enough yakkin, let's get on with it!

If you watch the video directly in youtube the like and subscribe buttons become available. Please click on these as it helps the channel's visibility in youtube's algorithms.


Thanks for watching and taking an interest. Mart.

https://youtu.be/9ZPdrkuYSHo

Russ/40 05-29-2020 10:51 AM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

Mart, the radiator in my '40 has the exact problem as yours did. Top has been modified like yours causing the tank to expand and contract due to no internal supports to contain expansion. The result over years is metal fatigue and cracking. I may use your technique, as your result is quite nice.

dwick01 05-29-2020 02:30 PM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

Awesome video!

KGS 05-29-2020 03:07 PM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

Mart, Nicely done!
Always enjoy your en devours in the garage.
There's an old Pennsylvania Dutch saying that I think applies here;
"She ain't much for lookin', but she's hell for stout"!
Keep up the good fight...:D
Ken

Graeme / New Zealand 05-30-2020 12:26 AM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

Mart my radiator has bulged too....basically it's a bit shagged so I'm watching it

GB

38coop 05-30-2020 07:54 AM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

I enjoyed your video. I like your torch. I don't use one very often but it looks easy to use compared to the bottle type.

cas3 05-30-2020 05:12 PM

Re: Radiator repairs and strengthening for pressure. Mart's 41 pu get's it's Rad fixe
 

another fine job mart, nice truck


All times are GMT -5. The time now is 01:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.