wishbone cap Hi cld some one post a pic of an original wishbone cap? I have a few and there are some differences... thanks very much
|
Re: wishbone cap Bratton's catalog should show a picture. The originals are thick stamped steel to fit the steel ball.
The later ones use a rubber cover over the ball and have a larger pocket and are thick cast iron. |
Re: wishbone cap For 80 years people have been replacing the original Ford Factory cap with aftermarket caps from a great many sources. So very few of today's restored or unrestored, cars have a cap matching the factory issue.
Today you might want to rely on 'the usual suspects' - Bert's in Denver (for an original), Bratton's in Maryland, and Snyders in Ohio, for excellent reproductions. |
All times are GMT -5. The time now is 09:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.