The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Camshaft oil leak (https://www.fordbarn.com/forum/showthread.php?t=203836)

Trevor 09-03-2016 10:59 AM

Camshaft oil leak
 

I have an oil leak behind my camshaft. Is there another gasket besides the half moon paper gasket to seal the back of the camshaft and stop the oil dripping into the flywheel housing?

100IH 09-03-2016 11:12 AM

Re: Camshaft oil leak
 

No, just the gasket but some rebuilders have machined the blocks for O rings and also the flat freeze plugs.

George Miller 09-03-2016 11:26 AM

Re: Camshaft oil leak
 

Quote:

Originally Posted by Trevor (Post 1348488)
I have an oil leak behind my camshaft. Is there another gasket besides the half moon paper gasket to seal the back of the camshaft and stop the oil dripping into the flywheel housing?

On some engines the bolt holes go all the way through the block by the camshaft. If they do and you are using lock washers, that could be your leak. If you take it apart put some sealer on the bolt threads.

hardtimes 09-03-2016 12:41 PM

Re: Camshaft oil leak
 

Quote:

Originally Posted by George Miller (Post 1348508)
On some engines the bolt holes go all the way through the block by the camshaft. If they do and you are using lock washers, that could be your leak. If you take it apart put some sealer on the bolt threads.

Hey George,
X 2 !
This is what I found on my latest B build. Used sealer as you suggested :)

700rpm 09-03-2016 04:57 PM

Re: Camshaft oil leak
 

It helps to use a little sealant on the surface if that gasket. I use Permatex non-hardening.


All times are GMT -5. The time now is 07:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.