late flathead in early chassis, hoses. The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038. This offset cut off about 6 1/2' long will solve the problem of hose alignment on this engine /frame combo. Like it was made for Flatheaders. |
Re: late flathead in early chassis, hoses. Quote:
|
Re: late flathead in early chassis, hoses. Old number was 21236(Carquest) and I have them on my 8BA in 32 chassis.
|
Re: late flathead in early chassis, hoses. I also used a Gates hose #21236 for 8BA in ‘32 frame. Worked well.
|
Re: late flathead in early chassis, hoses. Are these numbers good for 59A in a 32 frame?
|
Re: late flathead in early chassis, hoses. The lower hose depends greatly on the vertical positioning of the engine. For my 8BA in a 32 frame, I used a Gates 20151 (49-53 Ford) and shortened it a bit. The 20151 has 1/4" less offset than the Gates 21236.
|
All times are GMT -5. The time now is 10:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.