1930 roadster interior wood
 

I need help with the interior seat backrest wood support. The three pieces of wood that connect to the seat riser and the top piece of wood that connects to those three pieces and fits from side to side at the top. I have a new wood kit from Snyders but I can not make it fit correctly. Actually I do not know what is correct. Maybe someone who has an original roadster and restored his car recently can call me and guide me on how the wood was installed when my car was new. This is DON in Visalia California 559 786 0678

Re: 1930 roadster interior wood
 

The Snyder's link in that previous post has enough photos to get an idea of how the wood and the package tray worked to hold the rear seat back. Just click on the link and look at the different photos, One photo there is pretty good.

https://www.snydersantiqueauto.com/p...d=977678&cat=0