Axle shims Where can I find rear axle shims thinner than 0.010” ? One shim is not enough and 2 is too much....
Thanks - JIm |
Re: Axle shims 1 Attachment(s)
Make your own. Here's a pattern, but you'll have to adjust the size:
You could also make one .015". |
Re: Axle shims juz so u kno. Alumninum Beer can, soda pop can all are .0035 thick make good shim material.
|
Re: Axle shims Good to know ! Thanks for your responses. I’ll empty a beer can tomorrow to get the metal.....
Jim |
Re: Axle shims Sacrificial Beer. I like it
|
Re: Axle shims Quote:
|
Re: Axle shims I found a Model T .005” stainless steel shim that seems to do the trick in combination with the 0.010” shim already installed. Never thought of looking at Model T shims, but they fit a Model A axle quite well.
|
All times are GMT -5. The time now is 05:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.