The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   28-29 Front welled fenders (https://www.fordbarn.com/forum/showthread.php?t=297573)

Steve Plucker 04-20-2021 12:04 PM

28-29 Front welled fenders
 

At the bottom of the 28-29 front welled fenders, there is a hole for water drainage.

On ORIGINAL front welled fenders....Is that hole ROUND or OVAL?

Thanks.

Pluck

dj 04-20-2021 12:11 PM

Re: 28-29 Front welled fenders
 

I have an original 28 that has a round hole
Dennis

wrndln 04-20-2021 04:14 PM

Re: 28-29 Front welled fenders
 

2 Attachment(s)
Steve,
I have two original fenders with wells in them. One is a NOS fender for my 29 CCPU. The holes aren't quite round, but slight elongated in my opinion. The holes aren't quite really oval either. I am attaching pictures of them - judge for yourself from the pictures. If you need measurements let me know.
Rusty Nelson

Steve Plucker 04-20-2021 04:28 PM

Re: 28-29 Front welled fenders
 

Thanks DJ and Rusty. All the ones I have are round also EXCEPT the very early 1928 front welled fender which is a long oval hole. I am hoping that the Part Releases says something in relation to that.

Pluck

mercman from oz 04-20-2021 04:29 PM

Re: 28-29 Front welled fenders
 

https://www.fordbarn.com/forum/attac...p;d=1618953122

https://www.fordbarn.com/forum/attac...p;d=1618953122

Larger pictures of Welled Front Fenders as contributed by Rusty Nelson.

Dan Partain 04-20-2021 06:23 PM

Re: 28-29 Front welled fenders
 

5 Attachment(s)
Steve,
Here are some photos of the holes in 5 welled fenders, these are all the 3 1/8" style. The last one is taken from the bottom.
-DAN

Steve Plucker 04-20-2021 06:38 PM

Re: 28-29 Front welled fenders
 

Thanks Dan!

More to come on this!

Pluck

Roadster62 04-21-2021 10:28 AM

Re: 28-29 Front welled fenders
 

Think they started as round holes and became oval as the well was stamped?

Bob


All times are GMT -5. The time now is 08:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.