The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   31 Wide Bed PU Tail light mounting (https://www.fordbarn.com/forum/showthread.php?t=273605)

Ideucev8 12-05-2019 07:43 AM

31 Wide Bed PU Tail light mounting
 

Is there anyone that knows how that tail light arm mounts to the bed? Is there a bracket riveted to the bed side like the earlier one? A photo would be great.


Thanks,
Phil.

cjkohnast 12-05-2019 08:45 AM

Re: 31 Wide Bed PU Tail light mounting
 

There should be holes in the wood under the bed bolts about 3 inches long mount it.

BORN2L8 12-05-2019 12:53 PM

Re: 31 Wide Bed PU Tail light mounting
 

1 Attachment(s)
Maybe this picture will help some.

Brentwood Bob 12-05-2019 04:35 PM

Re: 31 Wide Bed PU Tail light mounting
 

Located on drivers side facing rear of bed. Notice only 2 special carriage holds thru wood frame.

Kurt in NJ 12-05-2019 05:04 PM

Re: 31 Wide Bed PU Tail light mounting
 

A long time ago my father had a widebed, with the original bed sills,there were only 2 holes, across from each other, the bracket with the triangle mounting didn't match, but a station wagon bracket matched

Ideucev8 12-05-2019 06:56 PM

Re: 31 Wide Bed PU Tail light mounting
 

Thanks for the replies guys.
Phil.


All times are GMT -5. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.