Door striker plate screws on coupe I want to replace the striker plate screws on a 30 coupe. My question is are the nuts on the screws captured? I don't want to find out the hard way.
All help is appreciated. |
Re: Door striker plate screws on coupe I did re-adjust the striker plate on my '29 this summer, the wear allowed the door to become slightly ajar. Usually a right turn or maybe a hard bump would do it. Probably replace mine this winter.. the nut plate is secure in the door frame construction on mine (a May '29 build). I just loosened the screws, adjusted the fit/closure, and tightened. So far no problems, good luck.! kb
|
Re: Door striker plate screws on coupe I replaced those screws on my 30 Coupe, don't remember why. IIRC, a movable threaded plate is captive behind the jamb. Replace one at a time to keep the same adjustmemt.
|
Re: Door striker plate screws on coupe Yes, captured square nuts behind the B pillar
|
All times are GMT -5. The time now is 11:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.