borg warner overdrive i installed a b w overdrive in my 31 pu. i have two questions...
!. can someone post a picture of how they rigged the cable where it operates the shift lever. if i pull out my handle it wants to buck and not push back in. 2. i want to put a safety switch on the tranny top to keep from engaging o d while in reverse. i have an article by some one who did this but can't find a suitable switch for the job and no part number is given. |
Re: borg warner overdrive I just installed one a month or so back. Will try to get a picture or 2. I don't understand why you would have trouble with the cable.
If you have the governor hooked up, you don't need a safety switch. |
Re: borg warner overdrive Quote:
|
Re: borg warner overdrive when building my o d i made the 1" spacer/ adapter out of aluminum and just big enough to do the job. i anchored the cable housing to this using a clamp like used on lawnmower throttles. my cable was out of alignment with the lever on the o d. i made thick spacer to move the cable out and a straighter shot to the lever. i hope that is going to help, but would to see a photo of how others have don theirs.
|
Re: borg warner overdrive put a spring on the od lever
|
All times are GMT -5. The time now is 05:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.