Radiator shroud emblem removal Stupid question but how do I remove the emblem on the shroud?
I want to try and keep it intact and re-install after I clean it up. https://uploads.tapatalk-cdn.com/202...ba6fae7cec.jpg https://uploads.tapatalk-cdn.com/202...ad10a58a89.jpg |
Re: Radiator shroud emblem removal Just tap it from the back.
You might want to put some oil on it before hand and let it sit. Looks rusty. Light tap putting the handle end of a large screw driver against emblem. Replacements are not as good. Enjoy. |
Re: Radiator shroud emblem removal Quote:
|
Re: Radiator shroud emblem removal I used a socket that was sized to the hole. Worked well.
|
Re: Radiator shroud emblem removal Is it just glued on? Or?
|
Re: Radiator shroud emblem removal It is only a press in fit, but rust makes a real tough glue sometimes.
|
Re: Radiator shroud emblem removal What would you guys recommend if the emblem is too loose a fit in the radiator? It there a way to flare out the ring on the back of the emblem a little? Or maybe just a little silicone?
|
Re: Radiator shroud emblem removal The cup will detach if you fuss with it very much. Epoxy has worked fo me.
|
Re: Radiator shroud emblem removal Ive seen them lightly spot welded cup to shell
|
All times are GMT -5. The time now is 06:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.