The Ford Barn - Flywheel on a 21 stud

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Flywheel on a 21 stud (https://www.fordbarn.com/forum/showthread.php?t=283748)

Don	07-08-2020 10:41 AM

Flywheel on a 21 stud

I only have a FW that uses a 10 inch PP ,will this work on a 37 21 stud engine??
The FW came off a 59ab truck engine,,,,,it fit the 21 stud engine aright ?but was wondering about starter match up and bell housing hitting thanks

cas3	07-08-2020 11:04 AM

Re: Flywheel on a 21 stud

it will work just fine

35fordtn

07-08-2020 07:06 PM

Re: Flywheel on a 21 stud

As long as you are not using a 32-34 transmission case it will work just fine.

All times are GMT -5. The time now is 08:29 PM.