The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   30 headlight parts finish (https://www.fordbarn.com/forum/showthread.php?t=291065)

Kingo 12-02-2020 07:53 PM

30 headlight parts finish
 

I have checked the standards and cannot find the finish for a few of the headlight parts. What was the finish on the rivets, attachment stud and plate on headlight bucket bottom and the stud and spring for the retaining ring?

Bob Bidonde 12-03-2020 08:27 AM

Re: 30 headlight parts finish
 

Rim Latch is polished stainless steel.
Reflector is silver plated.
Rim Retainer Clip is cadmium plated.
Inside Rim Clips are stainless steel.
Rim Latch Retainer Pin, Spring & Rivet are cadmium plated.
Headlight Mounting Bolt & its Retainer Strap are zinc plated.Base Plate to Headlight Shell Rivets are cadmium plated.

Kingo 12-03-2020 08:51 AM

Re: 30 headlight parts finish
 

Thank you

Kingo 12-03-2020 02:43 PM

Re: 30 headlight parts finish
 

Base plate cad plated as well?


All times are GMT -5. The time now is 01:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.