Is this crank trash? It could probably be welded, or does it need to be?
http://im1.shutterfly.com/media/47a3...D550/ry%3D400/ It's a 4" stroke Merc crank and I've already been through h and high water. I plan on a fairly warmed up street motor. Suggestions? |
Re: Is this crank trash? I would suggest you take it to a crank grinder and get his opinion. I believe it is worth saving. Good luck. Jack
|
Re: Is this crank trash? I have a crank grinder that has welded many cranks. He could weld that up and grind the crank and balance it and you could never see where it was fixed. Walt
|
Re: Is this crank trash? That would be an easy repair, that crank is worth saving.
|
Re: Is this crank trash? What is the current size of this crank, rods and mains?
|
Re: Is this crank trash? Standard, standard.
The rest of the crank looks fine. I would take it to a pro and get it checked out for cracks, of course. Just looking for experienced eyes to tell me if I would be wasting my time. Thanks guys. I may put off the engine build a little while and see if something better turns up. I've got plenty of other stuff to do on the car before it needs an engine. I can at least get the mounts remade...again...:rolleyes: |
All times are GMT -5. The time now is 06:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.