Data plate rivet holes don't line up Just purchased a data plate for the firewall on my late 31 Coupe. The rivet holes in the firewall don't line up with the holes in the repro plate. Holes are off by about 1/16" My firewall is not a re-stamp. Anyone run into this?
|
Re: Data plate rivet holes don't line up Can you post a picture
|
Re: Data plate rivet holes don't line up I can try but it will be difficult to show. The two bottom holes line up but the two top holes are both about 1/16 lower than the holes in the plate
|
Re: Data plate rivet holes don't line up 1 Attachment(s)
I had this problem when restoring my 190A. Rather than rework the original holes in the firewall, I pulled the holes in data plate using a rat tail file. Look closely and you can see the elongation of the holes. My hope is that a correct fitting plate will eventually become available.
|
Re: Data plate rivet holes don't line up I experienced this problem also. Like Bob has suggested, I elongated the holes and found that the heads of the rivets did cover the holes in the plate. You may have to elongate all four holes in the plate to get the fit you want. Ed
|
Re: Data plate rivet holes don't line up The file will work, but if you buy a good US made patent plate, they will line up perfect. Chinese patent plate won’t.
|
Re: Data plate rivet holes don't line up The plate I bought from Berts lined up perfectly.
https://modelastore.com/index.php?ro...&category_id=0 |
Re: Data plate rivet holes don't line up Quote:
|
Re: Data plate rivet holes don't line up I made it work. Next time I go to Bert's first
|
Re: Data plate rivet holes don't line up Quote:
Charlie Stephens |
Re: Data plate rivet holes don't line up Quote:
No matter who the vendor is, I’d suggest calling and ask if one part is better than another. Places like Berts, Brattons, Snyder’s, etc will give you their opinion. |
Re: Data plate rivet holes don't line up Quote:
Berts Model A Center has the correct sized plates. www.modelastore.com With some parts there are several sources for parts and Berts has used the various parts and they know which ones are good and which are not so good! |
Re: Data plate rivet holes don't line up Bert’s is a great source
Every time I tell someone and they don’t...... I get to use one of My favorite phrases.... “I told u so” :-) |
Re: Data plate rivet holes don't line up I bought one from Mike’s, it fit perfectly
|
All times are GMT -5. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.