1934 Tudor Windows Would anyone have a picture of the back window channel attached to the glass. I am using a vintique window kit and it needs to be cut down to work. Would like to be sure I am cutting in the correct place to allow it to work. I want the window to slide back and down like the factory. Thank you Gary
|
Re: 1934 Tudor Windows This is one of the back windows intact. On the other side..I have taken out the window and the frame channel setup attached to the handle. The window back channel is still in the panel space but can be seen from on top. The panel is difficult to take off. I'll take a pic of the frame channel or measurements if that will help.
|
Re: 1934 Tudor Windows 2 Attachment(s)
file size too big. here are the pics at a smaller size.
|
Re: 1934 Tudor Windows 1 Attachment(s)
Have you seen this? I went off this to fix mine. The stop screw in the channel is off and the roll back pin on the bottom bracket is off. The sliders don't fit worth a darn either. :mad: I have pictures showing operation but cant find them, I'll keep looking.
|
Re: 1934 Tudor Windows Some other reading...
http://www.jalopyjournal.com/forum/t.../#post-2740182 |
Re: 1934 Tudor Windows Even more reading... The bottom one explains how they work so you can figure what you need to do to them...
http://www.fordbarn.com/forum/showth...indow+channels http://www.tagchips.com/CARS/34FORD/...NDOW_REGULATOR |
Re: 1934 Tudor Windows Thanks guys
|
All times are GMT -5. The time now is 11:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.