180A Rear bumper crossbar spacer
 

Does anyone have the dimensions for the rear bumper crossbar spacers used on the deluxe phaeton (180A) with the one piece rear bumpers?

Thanks, Will

Re: 180A Rear bumper crossbar spacer
 

2-3/4'' Total Lenth / center to center of hole's 1-3/4'' / 1/2" off center off hole to edge. Same thickness as bumper bar brackets 5/16".

Re: 180A Rear bumper crossbar spacer
 

here's a picture of an original one
the ends are sheared at a slight angle
you can take a large bracket and cut it to look like this
turn the sheared end to the rear and it will look fine
it is 2 3/4 like Peter says
tom

Re: 180A Rear bumper crossbar spacer
 

Thanks guys!

Re: 180A Rear bumper crossbar spacer
 

I have several NOS 180A rear bumper crossbar spacers that are now available. Until reading this I knew what they were but did not know their the year and body style application.

Re: 180A Rear bumper crossbar spacer
 

i believe they are the same for all cars
they are just a substitution for the bumper bracket they are replacing
tom

Re: 180A Rear bumper crossbar spacer
 

They are put there when you only have a FULL bumper on the back.