39 Mercury running board Rubbers
 

Hi can anyone recommend the best place to get some new running board rubbers for my 1939 Mercury? Cheers Mark

Re: 39 Mercury running board Rubbers
 

None being reproduced that I am aware of!!!! Welcome to the world of 39/40 Mercury's!!! IF you find some please let me know I need two sets!!!

Re: 39 Mercury running board Rubbers
 

Private message sent.

Re: 39 Mercury running board Rubbers
 

There was a guy, Hunley Acuff in Rossville Georgia who vulcanized the correct covers on your boards years ago. I don't know if he is still around or not. Try Googleing him. It's worth a shot.

Re: 39 Mercury running board Rubbers
 

He’s out of business. I know the guy that bought the moulds for the 39 Mercury

Re: 39 Mercury running board Rubbers
 

Try Metro Moulded Products in Minnesota.

Re: 39 Mercury running board Rubbers
 

Thanks for the repliesi can't have my original ones recovered as I'm in the UK so need just the rubbers shipped, will try Metro Moulded products.

Re: 39 Mercury running board Rubbers
 

Mark, here is their email and phone # below.

[email protected]


Please Call the Number below to talk to Jim directly about his covers.
============================================

PS: I just talked to Jim, there, and he gave me his Direct toll free #
to call, as he said he lists having a Perfect reproduction cover
in stock. He is going to pull a cover and measure it, to be able
to compare to what you may need.
call JIM direct at his toll free # : (corrected number) 1-866-643-7826




.

.

Re: 39 Mercury running board Rubbers
 

As the owner of a 39 Merc I'd like to get into this conversation too. Some years ago Mike Kubarth recomended Mr. Acuff because he vulcanized the covers installed. As already mentioned Mr. Acuff is out of business. Ken/Alabama is the person you know who bought the molds at Metro Moulded? My running board covers aren't bad but I'd be interested in some exact repros. Thanks guys.

Re: 39 Mercury running board Rubbers
 

The person I know is not affiliated with Metro . I do know he has the moulds for the 39 Mercury and maybe Lincoln Zephyr. I asked him about the moulds for the 40 Ford but he doesn’t have them.

Re: 39 Mercury running board Rubbers
 

BTTT, I corrected the phone number to talk to Jim directly.

See post #8 above.




.