The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1937 Wiring Harness rhd (https://www.fordbarn.com/forum/showthread.php?t=253296)

Ramjet47 10-18-2018 12:16 AM

1937 Wiring Harness rhd
 

I am looking for a RHD wiring loom, dash and lights, for my 37 coup’e. Will a LHD loom connect up Ok?

Brian 10-18-2018 02:05 AM

Re: 1937 Wiring Harness rhd
 

No...The headlight loom from lightswitch to lights will be ok, but wiring up under dash on main loom will be too short.
There is some outfit in Oz that makes nice braided replacement RHD looms

koates 10-18-2018 03:59 AM

Re: 1937 Wiring Harness rhd
 

VINTAGE WIRING HARNESS in Ringwood (Melbourne) Victoria. They make very nice braided wiring looms and would be able to do a RHD 37 Ford. Google them. Regards, Kevin.

Ramjet47 10-19-2018 05:59 AM

Re: 1937 Wiring Harness rhd
 

Thank you Brian and Kevin on your reply to my question on a RHD loom for my 37 coup’e, I have ordered a complete loom from Paul at Vintage Wiring Looms today, www.vinwire.com.au. Paul was very easy to work with and offered to include turn indicator wiring and an electric fuel pump feed in the loom he will build for my restoration, all with cotton bound wire to original specs.
Regards to all at the Ford Barn,
Roger Carter.


All times are GMT -5. The time now is 12:12 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.