Wire Harness
 

I’ve a 1941 Ford 1/2 Pickup and would greatly appreciate consensus on which vendor you recommend to explore purchasing a complete wiring harness to replace existing. After 80 plus years, it’s time. The electrical system has been converted to 12 volt system otherwise I believe it to be original. Sincerely appreciate your recommendation.
Thank you!
Frank W Jonex

Re: Wire Harness
 

Bauer Electronics
Chris Olsen
541-389-7755

Re: Wire Harness
 

Rhode Island wiring (401) 789-1955 IF you are wanting concourse correct.

Re: Wire Harness
 

If you don't care about looks get a hot rod EZ harness, all wires are marked and turn signals included.

Re: Wire Harness
 

YnZ's Yesterday's Parts

Wiring Harness Catalogs | YnZ's Yesterday's Parts (ynzyesterdaysparts.com)
Top notch and they can customize it according to your needs such as turn signals.

Re: Wire Harness
 

Bauer used to only sell to parts sources. I didn't know that they sell direct. Most sources sell their products. Rhode Island Wire coats their wire to protect it from fade of the colors.

Re: Wire Harness
 

X’s 2 for Y n Z. They added the turn signal circuit in the harness on the Tonner.

Re: Wire Harness
 

My vote also for Bauer like ssffnomad. Chris will make it any way you want, Dearborn correct, turn signals added, or custom like on my 32 5w, running a 59 series engine and put a Vreg on the passenger side of the firewall. I have 2 40s, and a 32 5w with Chris's harnesses, everything fit, 2 Dearborns with the my 40 wagon. Never a problem. He is also not that far from me and is very prompt about shipping stuff out.

Re: Wire Harness
 

Thank you so very much for all of your input. Great info that I’ll use to make a selection.
The info you provide is of value to us newbies.
Frank W Jones
41 Ford 1/2 Ton Pickup ��������

Re: Wire Harness
 

Tyree Harris.