Manifold Heater Door Anyone have pictures of your manifold heater door solution on a 1930.
Thanks, Steve |
Re: Manifold Heater Door Sloution for what?
|
Re: Manifold Heater Door What is the best door to find/use?
|
Re: Manifold Heater Door |
Re: Manifold Heater Door The only problem I see is that the door itself, is too loose. It's either all the way open or fully closed. I made a flat spring that holds the where I put it. Other than that, it's ok. Also, I haven't found a good piece of flexible exhaust pipe for it yet and it works fine without it.
Terry |
Re: Manifold Heater Door That is actually the door I have been using but with the deflector flipped the other way! Works good but keeps closing up, I should try the spring setup you have shown there. I have been putting a cut up tin can between the door and manifold cover. Works good but has a tendency to rattle.
|
Re: Manifold Heater Door the one sold by the part suppliers such as synders will work on a auto lite heater mine works well!!!
|
All times are GMT -5. The time now is 09:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.