Water pump ? How can I tell if a rebuilt water pump has grease-less bearings/bushings in the front and/or rear.
Bob |
Re: Water pump ? See if it will take a few shots of grease.
|
Re: Water pump ? The front bearing with the fan off you can see the seal on the ball bearing. The rear is more difficult, the pump needs to be pulled, you can see the Rupert machined bearing and seal holder.
A's Always Dave |
Re: Water pump ? Check it the easy way!
|
Re: Water pump ? But would pumping grease into a grease-less water pump harm it?
|
Re: Water pump ? It won't take any if it is greaseless. just use a hand pump grease gun.
|
Re: Water pump ? If the passage is blocked, it won't accept grease. I don't know it the passage is blocked or not. I'd have to see one apart to be certain. I still use the OEM style.
|
Re: Water pump ? Quote:
|
All times are GMT -5. The time now is 12:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.