Finding a list of issued tools on a 36 Ford
 

Dear members:


I am trying to find a list and perhaps a photo of the issued tools for a 1936 Ford convertible sedan that a friend of mine has. Can someone share one with me or tell me where I can find one?
Thanks!

Re: Finding a list of issued tools on a 36 Ford
 

Tell your friend that all his questions about his car and every other 1935-36 Ford car are answered in the book of that name published by the EFV8CA, at the link below:
https://shop.efv8.org/products/1935-...book-softbound

Re: Finding a list of issued tools on a 36 Ford
 

lin stacy he is a member here he is an expert on all early ford tools he also sells complet o0rg. sets

Re: Finding a list of issued tools on a 36 Ford
 

I have ordered the book already and will probably give it to my friend as a gift.

Re: Finding a list of issued tools on a 36 Ford
 

Hi Richard:


How do I contact Lin Stacy? Thanks.

Re: Finding a list of issued tools on a 36 Ford
 

Lin Stacy is the tool advisor for the Early Ford V-8 Club. His contact information can be found in the V-8 Times magazine.

Re: Finding a list of issued tools on a 36 Ford
 

Here are some photos of my '36 kit. The numbers shown on one of the photos are from Lin's information.

There are two bags, one is 11 inches wide the other is 12 inches wide and the 12 inch one is the one needed to hold the 12 inch tire iron.

The 3-piece jack handle is one of the hardest tools to find, but a friend borrow mine and bought two Model A 2-piece jacks and made his own 3-piece jack handle. The part that goes into the jack faces inward on the picture.

There are also two types of jacks, the small handles used to raise the jack are different.

The wrenches are slightly thinner and not as clunky looking as that of the Model A wrenches.

Hopefully someone can repost my pictures and make them bigger, every time I try, nothing happens.

Steve in Denver

Re: Finding a list of issued tools on a 36 Ford
 

Hi Steve:
Thank you so much, this is exactly what I needed. My friend will be very happy.

Re: Finding a list of issued tools on a 36 Ford
 

There is also a envelope with top nut wrench and top instructions
and a bag for the center posts that I have not seen

Re: Finding a list of issued tools on a 36 Ford
 

You mean this one? Unfortunately I can't remember where I got it, but it was advertised in one of the V8 Times some time ago.

There is also a web site for Trunk Back Convertible Sedans.

http://www.36fords.com/wsn362E.html

Re: Finding a list of issued tools on a 36 Ford
 

Thanks again Steve, I will add this to my friends tool list.

Re: Finding a list of issued tools on a 36 Ford
 

Be sure to get the '35, '36 book available on the EFV8 web site, great book, a must have.

Re: Finding a list of issued tools on a 36 Ford
 

Hi Steve:


Already ordered the 36 book and will give it to my friend as a gift if he does not have it. THANK you for your help. While I have 4 Model A's, I am a member of the Early V8 club. And I have always admired the early fords!