The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   dimmer switch 40-41 (https://www.fordbarn.com/forum/showthread.php?t=287918)

41panelmark 09-29-2020 01:29 PM

dimmer switch 40-41
 

Arrrgh, I have tried 2 different aftermarket dimmer switches, each seem to not work or fail after a short amount of use. Anyone had good luck with one that they would recommend?

thanks in advance.

19Fordy 09-29-2020 02:25 PM

Re: dimmer switch 40-41
 

If you mean the head light dimmer switch this one looks promising as it was made back in the day as a replacement.
https://www.ebay.com/itm/1938-1947-F...UAAOSwHMJYCVyZ

Plus, there are a few for sale in the Swap Section. Just type in dimmer switch.

Kube 09-29-2020 03:16 PM

Re: dimmer switch 40-41
 

Or this one on eBay a lot cheaper...

Item ID: 124357131864

Jack E/NJ 09-29-2020 07:07 PM

Re: dimmer switch 40-41
 

1 Attachment(s)
http://www.fordbarn.com/forum/attach...1&d=1601424328Go here instead. Jack E/NJ

1931 flamingo 09-30-2020 08:23 AM

Re: dimmer switch 40-41
 

I believe in my 40 the switch is in the correct position BUT there's no way I can get my 10 1/2's on to it..................
Paul in CT

19Fordy 09-30-2020 08:45 AM

Re: dimmer switch 40-41
 

Paul, What do you mean by when you say there's "no way I can get my 10 1/2's on to it.................."?

Automotive Stud 09-30-2020 09:56 AM

Re: dimmer switch 40-41
 

Quote:

Originally Posted by 19Fordy (Post 1936754)
Paul, What do you mean by when you say there's "no way I can get my 10 1/2's on to it.................."?

His foot is too big to fit between the clutch and the kick panel.

19Fordy 09-30-2020 11:07 AM

Re: dimmer switch 40-41
 

OK, now I get it. Thanks.

41panelmark 10-02-2020 09:58 AM

Re: dimmer switch 40-41
 

Thank you for your help guys. Hopefully this solves the problem once and for all.

drolston 10-02-2020 01:13 PM

Re: dimmer switch 40-41
 

For the record regarding location of the dimmer switch hole:

The dimmer switch on my early model year '41 is lower on the floorboard; slightly below the clutch pedal hole. When I bought a replacement floorboard advertised to fit '41 to '48, the unit I received had the dimmer hole much higher up on the floorboard. I recall that from the '48 I owned 60 years ago as being correct position for that car. The wiring for the dimmer on my '41 would not reach far enough, so I cut a hole lower in the floorboard. That location is easier to reach but also subject to inadvertent activation.


All times are GMT -5. The time now is 08:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.