Help in identifying some early V8 parts
 

I acquired these as part of a pile o' parts deal and was hoping that someone on here with smarts can tell me what model year these are from. Thanks in advance.

Re: Help in identifying some early V8 parts
 

The steering column bracket with the switch appears 1940-47 pickup

Re: Help in identifying some early V8 parts
 

The other steering column bracket below it is '40 pass car

Re: Help in identifying some early V8 parts
 

The one with the switch looks exactly like my 39 picup column drop

Re: Help in identifying some early V8 parts
 

Thanks gentlemen ! I appreciate it.

Re: Help in identifying some early V8 parts
 

Just in case someone's interested, the u-bolt plate (top left in pic) is 1932-34. Not sure about the u-bolts yet.

Re: Help in identifying some early V8 parts
 

The squared off u-bolt with the nipple on the inside of the U is for a '32-'34 rear spring.

Re: Help in identifying some early V8 parts
 

David G, thank you ! Is the bracket also '32-'34? And wouldn't there be 2 each of these for the rear spring ?

Re: Help in identifying some early V8 parts
 

The one on the u-bolt is on upside down if you are interested in that.

Re: Help in identifying some early V8 parts
 

The flat piece with the oval hole in the center and four round holes on the corners fits under the front spring on 1932-34 Fords and is used in conjunction with the two rounded U-bolts. Yes, two of the squared-off U-bolts are required for the rear spring.

Re: Help in identifying some early V8 parts
 

the oval hole is for the rubber bumper stopper thing to mount in

Re: Help in identifying some early V8 parts
 

Many thanks ! Are the 2 'squared' u-bolts for '32-'34 as well?