The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Assembling 1939 Tudor HELP! (https://www.fordbarn.com/forum/showthread.php?t=36865)

Karl Wolf 05-12-2011 10:58 PM

Assembling 1939 Tudor HELP!
 

I am in the process of putting my 1939 Tudor Deluxe back together, after a long time apart... Memory does not hold up... I am hoping some one near me has an original or near original car that I might take a look at, from under side...
Specifically looking for speedo cable and park brake cable routing along frame and thru firewall... (Probably something else also)
I am in Marin County, just north of the Golden Gate bridge... Phone is 415 435 4800...
I am grateful, in advance for your kindness... Karl

Jake H. 05-12-2011 11:59 PM

Re: Assembling 1939 Tudor HELP!
 

I can try and take some digital photos of mine this weekend. It's a mostly stock, original car.

Aquaroscoe 05-13-2011 12:43 PM

Re: Assembling 1939 Tudor HELP!
 

I think the brake cable is debatable, but the concensus is that it runs from the handle, through the 'U' opening (in the wood toe board) between the steering mast and the firewall, You will see the firewall has a small cut out where the wood rest on it that the cable passes through. Then down the x-member.

1932 V8 05-13-2011 06:06 PM

Re: Assembling 1939 Tudor HELP!
 

1 Attachment(s)
Hey Karl , I am in the North end of Santa Rosa . I have a fairly original 39 Tudor Dlx . You are more than welcome to come take a look when you can . I am home in the evenings and most weekends . The next few weekends are a little busy but I am sure we can work something out .
Thanks , Mike 707 217 8751


All times are GMT -5. The time now is 05:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.