Crab distributor vacuum passage o-ring Just rebuilt my spare distributor. The o-ring on the mounting face was flattened and hard, so I dug it out. Now I can't find a replacement at the usual suppliers.
Is there a supplier? Is there a commercial o-ring that will work? |
Re: Crab distributor vacuum passage o-ring Go to any well stocked hardware store. I am sure that you will be able to find something suitable in the large selection of "O"-rings most good stores carry.
|
Re: Crab distributor vacuum passage o-ring I got mine from Bubbas Ignition.
|
Re: Crab distributor vacuum passage o-ring Quote:
|
Re: Crab distributor vacuum passage o-ring If stuck you could cut a short piece of suitable hose. Vacuum hose perhaps?
|
Re: Crab distributor vacuum passage o-ring Quote:
|
Re: Crab distributor vacuum passage o-ring A while back, Bubba was giving these away for free. He mailed out two o rings to those who inquired. I'm working in the garage, if I find them, you are welcome to one. I'll DM you when I find them.
|
Re: Crab distributor vacuum passage o-ring Here's Bubbas old post. He uses a Toyota part for the square cut seal. I have used a piece of fuel line that I cut clean and straight.
https://www.fordbarn.com/forum/showt...+vacuum&page=2 |
Re: Crab distributor vacuum passage o-ring Joe's Antique Auto has them listed in his catalog pg 52 I ordered some they fit perfectly
|
Re: Crab distributor vacuum passage o-ring any one that needs a couple just send me a self addressed envelope and i will send you a couple ,glad to help
Bubbas 5237 west ford street Indianapolis Indiana 46224 |
All times are GMT -5. The time now is 05:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.