33 Dash instrument gage panel I would like to know the thicknes of the engine turned gage panel on a 33 Dash as I have to make one. Thanks Stan
|
Re: 33 Dash instrument gage panel Stan, I made mine {from a street speed limit sign the county was replacing.
Make a set of(M-F) bucks from wood & lightly lube. Lay the aluminum on the female buck & male on top of the metal, set it in a 20 ton press go to work adding light pressure. When you get to the corners add heat & hammer gently to prevent stretching & cracking , cut out the gauge & speedo & polish. If engine turning do that before cutting the holes. |
Re: 33 Dash instrument gage panel |
All times are GMT -5. The time now is 05:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.