The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Oil pan 59AB photos (https://www.fordbarn.com/forum/showthread.php?t=156253)

Flysafe 04-09-2015 06:22 AM

Re: Oil pan 59AB photos
 

1 Attachment(s)
Thank you so much for the photos JSeery, have the same lines and holes, that I have been drawing.

If is possible yet, can you take a close-up of the areas that I marked?

Thank you very much.

All the best,
Jorge

JSeery 04-09-2015 07:44 AM

Re: Oil pan 59AB photos
 

2 Attachment(s)
See if this is what you are looking for. PM me your email address and I will email back the original higher res photos (around 4Mb)

Flysafe 04-09-2015 11:03 AM

Re: Oil pan 59AB photos
 

Thank you JSeery.

Flysafe 04-13-2015 11:43 AM

Re: Oil pan 59AB photos
 

1 Attachment(s)
In progress :)

Flysafe 04-14-2015 02:13 PM

Re: Oil pan 59AB photos
 

Hello all,

This part gave some work, now do the rest of the holes.

http://i141.photobucket.com/albums/r...ps6bj42cfe.jpg

http://i141.photobucket.com/albums/r...psjy2jkicw.jpg

http://i141.photobucket.com/albums/r...ps2pqfb352.jpg

Ronnie 04-14-2015 06:43 PM

Re: Oil pan 59AB photos
 


You are showing 8ba timing components they are different from 59a.

R

Flysafe 04-14-2015 06:53 PM

Re: Oil pan 59AB photos
 

What are the components that are not correct?

Ronnie 04-14-2015 10:25 PM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by Flysafe (Post 1069094)
What are the components that are not correct?


The timing gears

R

JSeery 04-14-2015 10:31 PM

Re: Oil pan 59AB photos
 

59a and 8ba cams rotate in opposite directions, so the teeth on the gears would be in the opposite direction. The crank gear and the cam gear are matched sets.

Russ/40 04-14-2015 10:37 PM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by JSeery (Post 1069235)
59a and 8ba cams rotate in opposite directions, so the teeth on the gears would be in the opposite direction. The crank gear and the cam gear are matched sets.

Simply not true! 59A and 8BA cams turn the same direction. Only the cut of the gears differ.

Flysafe 04-15-2015 05:44 AM

Re: Oil pan 59AB photos
 

So it is only the diretion of the teeth gears correct, I need flip over the both gears teeth?

Thank you so much by the notice.

JOrge

Ronnie 04-15-2015 08:31 AM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by JSeery (Post 1069235)
59a and 8ba cams rotate in opposite directions, so the teeth on the gears would be in the opposite direction. The crank gear and the cam gear are matched sets.

Nope time to go back to flathead school. "LOL" :D

R

Ronnie 04-15-2015 08:36 AM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by Flysafe (Post 1069306)
So it is only the diretion of the teeth gears correct, I need flip over the both gears teeth?

Thank you so much by the notice.

JOrge

Info for you
http://www.vanpeltsales.com/FH_web/F...timinggear.jpg

http://www.vanpeltsales.com/FH_web/F...ngear-alum.jpg

http://www.vanpeltsales.com/FH_web/F...m_1940to48.JPG

http://www.macsautoparts.com/ford_me...passenger.html

http://www.honestcharley.com/hot-rod...-alum-59a.html

R

Flysafe 04-15-2015 10:53 AM

Re: Oil pan 59AB photos
 

1 Attachment(s)
Thank you so much Ronnie by the notice and the photos too.
As I don't know of any existing engine near me not always it is clear, my support it is photos that I found in my searches or some help from the members of the forum.

Now i believe that is correct, the left that i have, the right it is the new one.
The engine that I have been designed it is the 59AB.

Thank you all for the help :)

All the best,
Jorge

JSeery 04-15-2015 01:50 PM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by Russ/40 (Post 1069239)
Simply not true! 59A and 8BA cams turn the same direction. Only the cut of the gears differ.

Sorry about that, not totally awake on that one!!!!! The thrust of the cam is reversed, not the cam rotation. The 59a thrust the cam toward the engine and the 8ba thrust the cam toward to cover because of the cut of the gears. Some days are better than other!

JSeery 04-15-2015 01:51 PM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by Ronnie (Post 1069392)
Nope time to go back to flathead school. "LOL" :D

R

Yep, asleep at the wheel on that one!!

Yackobeen 11-15-2019 05:17 PM

Re: Oil pan 59AB photos
 

Great work that model is really neat! Would you share a .step file of the 59AB intake manifold?
I would love to 3D print one for my desk!
Jesse

Ronnieroadster 11-15-2019 07:37 PM

Re: Oil pan 59AB photos
 

Quote:

Originally Posted by Yackobeen (Post 1821562)
Great work that model is really neat! Would you share a .step file of the 59AB intake manifold?
I would love to 3D print one for my desk!
Jesse



The original poster was last active on this site in 2015


All times are GMT -5. The time now is 02:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.