'55 Vic Hi Perf. 272 1 Attachment(s)
My newly acquired '55 Victoria has the stock 272 Special V-8 producing 182 hp.
Besides the 4 bbl carb, duals and 8.5:1 comp. ratio does anyone know if the cam was different? Also, how was the comp. ratio increased...via the combustion chambers or crowned pistons? |
Re: '55 Vic Hi Perf. 272 The camshaft in the 182 HP 272 Y-Block is the same as the 272 2 barrel cam. The compression ratio of your engine was increased from 7.5:1 to 8.5: 1 by using different casting number cylinder heads that had slightly smaller combustion chambers.
Sal |
Re: '55 Vic Hi Perf. 272 Beautiful car !!!!
|
Re: '55 Vic Hi Perf. 272 Didn't see many of these back in the day. See fewer now.
|
Re: '55 Vic Hi Perf. 272 Codes to compression ratios http://www.ford-y-block.com/cylinderheadchart.htm
|
Re: '55 Vic Hi Perf. 272 1 Attachment(s)
Quote:
55 ECL-A - ECG-B 272 - 2 bbl - Int Valve - 1.78" CR 7.6 162HP 55 ECG-D 272 - 2 bbl - Int Valve - 1.78" CR 7.6 162HP 55 ECG-A - ECG-C 272 - 4 bbl - Int Valve - 1.78" CR 8.5 182HP (Combustion Chamber Volume -CC's- Not Shown On Chart) |
Re: '55 Vic Hi Perf. 272 Real nice like it a lot !
|
Re: '55 Vic Hi Perf. 272 some 55 heads i cant remember which one had .035 shaved of to raise the comp,.
|
Re: '55 Vic Hi Perf. 272 Thanks Guys...really helpful :)
|
All times are GMT -5. The time now is 01:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.