U-Joint Lub
 

Is there a better way of lubing the throw-out bearing? My PicUp and I are getting older now days, and I'm having a hard time getting to it. Did install a transmission dip-stick which took care of that issue
Thanks

Re: U-Joint Lub
 

U-joint or throw out bearing?

Re: U-Joint Lub
 

The throw-out -- the one forward of the shift lever under a metal panel. I'm having to removed my thick floor mat. That u-joint is a bear too (for me

Re: U-Joint Lub
 

Most throw out bearings these days are sealed. How old is yours?

Re: U-Joint Lub
 

Most replacement release bearings today are sealed and can't be greased thru the collar fitting.

Older bearings can be greased thru the collar fitting.

A flexible hose could be fitted to the grease fitting to the side of the bell housing so the grease fitting could be accessed near the pedal shaft.

Re: U-Joint Lub
 

Ruth/Patrick
Sealed Bearing -- so that's what my problem is

Thank you

Re: U-Joint Lub
 

That collar needs/should be greased every once in awhile, a pump or two will do.