The Ford Barn - Front Engine Mount Post Length

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Front Engine Mount Post Length (https://www.fordbarn.com/forum/showthread.php?t=284340)

jharrellh

07-20-2020 03:03 PM

Front Engine Mount Post Length

Curious how long the threaded post should be on a front engine yoke. I suspect mine may have been sheared off and filed, since it seems a little short and has no cotter pin hole. It was mounted with rubber donuts, replacing with the proper spring mount. Thanks!

Garagekulture13

07-21-2020 09:00 AM

Re: Front Engine Mount Post Length

Looks like right at 2"https://uploads.tapatalk-cdn.com/202...bb0802270a.jpg

Sent from my SM-N950U using Tapatalk

Gary WA

07-24-2020 02:23 PM

Re: Front Engine Mount Post Length

Quote:

Originally Posted by jharrellh (Post 1911416)

I have some with cotter key holes some without but approximately all are close to 2"+-

jharrellh

07-24-2020 10:12 PM

Re: Front Engine Mount Post Length

Thanks so much! Turns out mine was a little short, and on closer inspection had been repaired in the past. Ordered a replacement and all went together without drama. Thanks for the help!

All times are GMT -5. The time now is 08:59 PM.