Coupe Package Tray bar
 

I have a 1931 Coupe. I recently installed a LeBarron Bonney upholstery kit. My question is about the package tray and the seat back cushion brackets. As referenced in the Service Bulletins on page 257 (regarding moving the seat to give more room for tall people), a package tray bar and seat back cushion brackets (A-47942-B) are mentioned. I do not have either of those items and I am not tall, so I would like to install those parts. I have looked online at the major suppliers catalogs and cannot find either part. I have not called Bert's yet to see if they have originals in stock. If I am not able to get these parts from Bert's, do you know of any other sources for these parts? Or do you have measurements for these parts so I could try to make them? Also, does anybody have any photos of these parts? It would be helpful to me to be able to see photos of them.

Thanks for any help you can give me.

Ken

Re: Coupe Package Tray bar
 

You might try this ad: http://www.fordbarn.com/forum/showthread.php?t=200697 I don't know exactly what you need or what he has so I will just point you in his direction.

Charlie Stephens

Re: Coupe Package Tray bar
 

Thanks for the link.

The link below has the picture that is in the Service Bulletins. According to the bulletin, the package tray bar is screwed into the front of the package tray itself with the four screws (C). The brackets I am asking about are labeled "D" in the picture.

http://www.modelagarage.com/node/163

Thanks again,

Ken