1940 Ford Convertible Top Bows Does anyone know where I can get the special machine bolts and copper spacers for the top bows on the '40 convertible? I have the caps for the rivets. I also need the piece on the passenger side between the top bow and first knuckle. The tab broke off. I believe it is cast aluminum; I'm trying to get mine fixed.
|
Re: 1940 Ford Convertible Top Bows Got a picture of what you need?? I might have one. Might try Roy Nacewicz for the bolts. When I built mine he didnt have them but that was 17 yrs ago .
|
Re: 1940 Ford Convertible Top Bows Ken,
I belive that a company named Totally Stainless in Penn. makes the bolts. I have directed a number of customers to them for top iron bolts for various years and those that I have heard back from seem very satisfied. Roy Nacewicz |
Re: 1940 Ford Convertible Top Bows Thanks for responding. I will check on the status of the part being repaired, and maybe I can give you a part number.
|
Re: 1940 Ford Convertible Top Bows Just got word part can't be repaired, do you have the piece that goes above the passenger side? On the top bow, across passenger side window, first knuckle joint?
|
Re: 1940 Ford Convertible Top Bows Is this the cast piece that has a double eye that the top bow attaches to?
|
Re: 1940 Ford Convertible Top Bows Is it the piece that's made of diecast?
|
Re: 1940 Ford Convertible Top Bows This whole piece is about 22-23 inches long. I would buy the whole piece to get it. The part I need is at the knuckle joint. It's riveted to the piece above the window on the passenger side. I need the passenger side. The part number for the driver's side (which is probably one digit off) from the passenger side, is 01A6653109. Would greatly appreciate any help.
Steve |
All times are GMT -5. The time now is 03:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.