how many 1/8s can there be in 3/8 When I flip my dist and check for 3/8 off one hole thats fine....OOOOKAY. But on the other side its like 5/8. YES I'm on the wide side
|
Re: how many 1/8s can there be in 3/8 Are you trying to set both sets of points on a crab dist?
If so you only "time" the one set. Here is some info from VanPelts http://www.vanpeltsales.com/FH_web/f...str-timing.htm |
Re: how many 1/8s can there be in 3/8 Well how many thousands in an inch? There’s got to be a million of them. There little bitty fuckers.
|
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
Checkaroony. Line up with one hole. Pi55 on the other |
Re: how many 1/8s can there be in 3/8 Quote:
Even counted million's when it was necessary. |
Re: how many 1/8s can there be in 3/8 I worked in tooling as well, but guess I was too lazy to do the counting! A lot of our stuff was fine work, but a lot was large scale as well. We did a lot of work with optical devices, somewhat like using a transit.
|
Re: how many 1/8s can there be in 3/8 Quote:
My statement was a standing joke I would ask. Some of the answers were shocking. |
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Was that a linear inch..... or a square inch....or perhaps a cubic inch?
|
Re: how many 1/8s can there be in 3/8 Kube [Mike], you sound just like my dad.......accurate down to the "unth". He had a shop & made initiaters for F-85 ejection seats......mucho skill and percise everything. Do i right ......good enough was Not good enough.
mike |
Re: how many 1/8s can there be in 3/8 Quote:
Yeah, "good enough" was simply not a thing. I truly enjoyed my career. I was able to use my mind and my hands and get paid for it! |
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
On a serious note, I did (often) have to measure to the millionth's. I suppose the guy flying the jet may not know that but I'm willing to bet he appreciates the fact I helped keep him airborne. |
Re: how many 1/8s can there be in 3/8 I thought this was a trick question when I read the header :D :D :D and y'all have given some great responses :) :)
|
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
|
Re: how many 1/8s can there be in 3/8 Quote:
|
All times are GMT -5. The time now is 06:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.