Cadillac 331 in a Ford I am looking for a set of motor mounts to put a 1950's Cadillac 331 in a 35-40 Ford. I know Hurst made these in the past.
Mike 425-478-1271 |
Re: Cadillac 331 in a Ford I've never seen one but I've heard them referred to as "Fordillacs".
|
Re: Cadillac 331 in a Ford Its a near bolt in if you have the starter housing that moves the starter to the right hand side. Setup requires an adapter plate and pilot bearing, behind the engine and Hurst mounts for the front as well as the starter adapter. This assumes you are using the Ford trans.
|
Re: Cadillac 331 in a Ford Try emailing Matt at iron trap garage, I think they just put a 331 Caddy in a ‘38
[email protected] They have lots of parts for sale on their website, also check out their YouTube. Caddy into ‘38 conv. https://youtu.be/6KOJ0Bwpcnw?si=t0dEWhETCGcole3s |
Re: Cadillac 331 in a Ford starter does not have to be moved olds does
|
Re: Cadillac 331 in a Ford Try Belmonts Rod and Custom 781-326-9599
|
Re: Cadillac 331 in a Ford Quote:
Ditto on the starter relocation... Cad engines in Fords was a very common application during the mid '50's.. |
Re: Cadillac 331 in a Ford Matt said parts are listed on Instagram (which does not work for me) ?
|
Re: Cadillac 331 in a Ford |
Re: Cadillac 331 in a Ford Thanks Fritz that works
|
Re: Cadillac 331 in a Ford Amazing
|
Re: Cadillac 331 in a Ford Quote:
I am going to make them with the help from a good friend. Anyone else want some? Let me know. Thanks to all for the response! |
Re: Cadillac 331 in a Ford Several years ago if my memory is right I saw one of these conversions in AZ. I think it may have been owned by Jackie Howerton? Nice green 40 with patina.
|
Re: Cadillac 331 in a Ford When I was first on the H.A.M.B., I saw a link to "Belmont's" site. At that time, they had the entire Offenhauser catalog on it. Turned out that it was just for reference only, but it drove me crazy for a while, because just about any Internet search for old speed equipment ended up there. They had none of the old stuff.
I haven't been led that far astray since a certain stripper back in '92.:D |
Re: Cadillac 331 in a Ford Offenhauser used to a good source but since the family sold the business the new owners are not the best at running the business. Availability of parts has diminished and prices have increased significantly.
|
Re: Cadillac 331 in a Ford |
Re: Cadillac 331 in a Ford Nice install! A Ford in a Ford very nice!
|
Re: Cadillac 331 in a Ford A pair of scissors, some cardboard, a hack saw, a drill motor, some 1/4 inch plate and you can have some mounts far superior to what you can buy.
I did one in "55" with a modified 37 LaSalle transmission. That thing could be shifted so fast it sounded like a Lenco. |
Re: Cadillac 331 in a Ford I put a 331 in my 40 in 2019, I got the hurst style mounts new from Mitchell Motor Works. Not sure if Mitch is still in business but his number was 415-806-4345 and his email was [email protected]
|
Re: Cadillac 331 in a Ford Quote:
Also check out "Speed Gems" for different hot rod applications |
All times are GMT -5. The time now is 10:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.