need a diagram
 

Did all the changes for 12 volt with new alternator. Putin a 12 volt mini starter made for the model A. Need a diagram to convert to push button start. Have the solenoid in place & the cables from battery to solenoid & solenoid to starter. This is where I'm stuck.

Thanks Lefthander 1930

Re: need a diagram
 

Did you not get a wiring diagram w/the starter?
Depending on the solenoid you probably need to run a switched 12V + wire to the small terminal on the solenoid to activate it. Typically a NO (normally open) push button switch would be used.
A picture of what you have would help.

Re: need a diagram
 

This is a simple diagram https://encrypted-tbn0.gstatic.com/i...yCyAA&usqp=CAU

Re: need a diagram
 

Doesn't the starter have a solenoid?
This picture is from Bratton's.