The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Model A Taxi (https://www.fordbarn.com/forum/showthread.php?t=286243)

PalAl 08-27-2020 09:51 AM

Model A Taxi
 

1 Attachment(s)
Hey Model A guys, did you know that The Henney Motor Company, a builder in Freeport Illinois was stretching the wheelbase on Model A Fords and turning them into taxi cabs. Does anyone know if there are any Model A taxicabs like this listed in the national clubs? Would love to see pictures and descriptions.

Chuck Sea/Tac 08-27-2020 07:50 PM

Re: Model A Taxi
 

Steve Hamilton in Washington had one for a short time recently and then sold it. Not sure to who?

PalAl 08-27-2020 11:10 PM

Re: Model A Taxi
 

Quote:

Originally Posted by Chuck Sea/Tac (Post 1924849)
Steve Hamilton in Washington had one for a short time recently and then sold it. Not sure to who?

Maybe the new owner will see the post and send some pic's and info

77Birdman 08-28-2020 08:50 AM

Re: Model A Taxi
 

I thought it was odd that Ford made a 'Taxi' specific auto. After reading an article on Checker, I found that in the early days the taxi business was cut throat. The larger cities had laws that said a vehicle had to be purpose built to be used in the taxi business. I could not find where the basis of this was, but I would surmise that Checker may have been instrumental in lobbying for this.

Purdy Swoft 08-28-2020 12:16 PM

Re: Model A Taxi
 

The model A taxi was the only four door body that used the coupe pillar style cowl .

WTSHNN 08-28-2020 01:30 PM

Re: Model A Taxi
 

1 Attachment(s)
Quote:

Originally Posted by Chuck Sea/Tac (Post 1924849)
Steve Hamilton in Washington had one for a short time recently and then sold it. Not sure to who?

Was it one of these custom bodied Henney jobs shown in the first picture or was it the Ford produced 135-A taxi?

-Tim

Neil Mylar LakewoodCA 08-28-2020 07:13 PM

Re: Model A Taxi
 

Did the Ford taxi have wooden floor sills?

Chuck Sea/Tac 08-28-2020 07:57 PM

Re: Model A Taxi
 

1 Attachment(s)
I don’t have a photo of the taxi, but I knew I’d see a picture somewhere. It was the May 2020 hemmings model A calendar.

warhorseracing 08-28-2020 08:19 PM

Re: Model A Taxi
 

Why did an independant maker, Henney, produce what Ford was already producing? Was Henney subbing out work such as Murray and Briggs did on the four doors?

jw hash 08-28-2020 08:22 PM

Re: Model A Taxi
 

Steve Hamilton`s was an original ford production one, and it went to Australia. I remove all the asbestos containing materials from the car and replaced it with non asbestos containing materials in the car before it was shipped.

Jim/GA 08-28-2020 08:52 PM

Re: Model A Taxi
 

Quote:

Originally Posted by warhorseracing (Post 1925204)
Why did an independant maker, Henney, produce what Ford was already producing? Was Henney subbing out work such as Murray and Briggs did on the four doors?

Good question. A coach builder would try to expand their business. This ad was from 1929, during the boom, before the crash.

Just because they ran this ad in the Ford Service magazine does not mean that they actually produced many of them. They needed to develop demand for them with ads.

Compare the two photos. The Henney one has a full rear door, no cutout for the rear fender. The chassis is stretched. It looks like they started with a Tudor Sedan body. The front door is wide, like a Tudor. You see there are 2 rows of adult men in the car. This is a bigger car than Ford sold.

This is a cool ad. I'd sure like to know if any survived.

.

warhorseracing 08-28-2020 09:17 PM

Re: Model A Taxi
 

Quote:

Originally Posted by Jim/GA (Post 1925212)
Good question. A coach builder would try to expand their business. This ad was from 1929, during the boom, before the crash.

Just because they ran this ad in the Ford Service magazine does not mean that they actually produced many of them. They needed to develop demand for them with ads.

Compare the two photos. The Henney one has a full rear door, no cutout for the rear fender. The chassis is stretched. It looks like they started with a Tudor Sedan body. The front door is wide, like a Tudor. You see there are 2 rows of adult men in the car. This is a bigger car than Ford sold.

This is a cool ad. I'd sure like to know if any survived.

.

That is what I noticed was the door being a full door like a regular four door front as it is smaller than the front one on the Henney. Is the ad an actual picture or an artists rendering? Hard to tell.

WTSHNN 08-28-2020 10:59 PM

Re: Model A Taxi
 

Quote:

Originally Posted by warhorseracing (Post 1925204)
Why did an independant maker, Henney, produce what Ford was already producing?

Because Ford's were a flop. They weren't as big as most other specifically designed taxis so they weren't really a preferred car for large fleets.

Henney, already familar with producing ambulances and hearses on other manufacturers chassis probably thought it would be easy to modify a Model A into a stretched taxicab.

This is from coachbuilt.com
"Henney Motor Co. produced 100 taxicabs on stretched Model A Ford chassis as well as their normal professional car line. They also supplied 3-piece ash roof rails to Ford who used the sub-assemblies on the 1929 Model A Fordor body framework."

The originally posted image can be found on pg 217 in the book Those wonderful Unauthorized Accessories for the Model A Ford.

-Tim

Aarongriffey 08-29-2020 04:17 AM

Re: Model A Taxi
 

I read that the Ford built taxis had a few inches of the top opening with the back doors to provide more head room when getting in and out.

shew01 08-29-2020 04:30 AM

Re: Model A Taxi
 

Quote:

Originally Posted by jw hash (Post 1925205)
Steve Hamilton`s was an original ford production one, and it went to Australia. I remove all the asbestos containing materials from the car and replaced it with non asbestos containing materials in the car before it was shipped.


Other than brake linings, what would have contained asbestos?


Sent from my iPhone using Tapatalk

Dave Slater 08-29-2020 09:09 AM

Re: Model A Taxi
 

That’s true that the top opening was lifted a couple of inches for more headroom but not on the Model A Taxi. It was introduced on the 1933/1934 Taxi

rotorwrench 08-29-2020 09:52 AM

Re: Model A Taxi
 

Ford didn't make very many taxi cabs (5354 units) and production was short (January 1929 to February 1930). Briggs made all of them from Town Sedans modified for a meter and a rear facing jump seat on the passenger side (no front passenger seat). There was a partition wall that had glass windows between the drivers compartment and the rear seat area. Taxi lighting for the flicker lights and vacant sign were optional.

There were several other companies that built cabs from Fordors & Town Sedans so there was too much competition for the market and Ford was selling the other builders cars any way so it's no wonder they stopped production.

Model "A" Fords 08-30-2020 11:12 AM

Re: Model A Taxi
 

Quote:

Originally Posted by shew01 (Post 1925255)
Other than brake linings, what would have contained asbestos?


Sent from my iPhone using Tapatalk

Asbestos in rad & gas cap gaskets (area 15 in judging standards), head & manifold gaskets (area 1) spark plug gaskets (area 2).

shew01 08-30-2020 06:20 PM

Re: Model A Taxi
 

Quote:

Originally Posted by Model "A" Fords (Post 1925726)
Asbestos in rad & gas cap gaskets (area 15 in judging standards), head & manifold gaskets (area 1) spark plug gaskets (area 2).


I would never have guessed... Thanks.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 03:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.