28 Tudor header brackets missing 2 Attachment(s)
Our 28 Tudor was disassembled by a PO who should not be allowed near old cars . It seems we are missing a bracket that should tie the curved steel side roof to the wood header . It’s one of those things when you have not got it you don’t know it’s missing, till the jigsaw seems Like it’s missing a bit. Any pictures or suggestions appreciated.
|
Re: 28 Tudor header brackets missing At the end of that triangle piece in your photo should have a right angle tab with a hole for a wood screw. This is a very weak area on 28-29. 1930 was completely different up there. They had an actual corner bracket that was much stronger.
|
Re: 28 Tudor header brackets missing Thanks for that @denniskliesen . The car is not 100% original so perhaps with pictures I can fabricate an improved 30 style bracket. Plus it won’t be seen .
|
Re: 28 Tudor header brackets missing Anyone got any pictures? I have had a look at a couple of catalogs and came up empty.
|
Re: 28 Tudor header brackets missing No pictures available but I can tell you that the strap that you are referring to is about 1-3/4" long by 3/4" wide and has two holes to secure it to the header with two flat head wood screws.
|
Re: 28 Tudor header brackets missing 1 Attachment(s)
Mac's, for one has them - likely others also.
- https://www.fordbarn.com/forum/attac...0&d=1596433114 |
Re: 28 Tudor header brackets missing Thanks Randy , macs/ ecklers is usually my last choice, but I see made in USA. I did surf around on a couple of other A sites And still found zero. Now I know what they look like at least , I will fold my own .
|
All times are GMT -5. The time now is 02:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.