gas cap gasket Hi
Looking to secure the gasket on my 29 gas cap. What can be used that will hold the gasket in place? Thanks Al |
Re: gas cap gasket It just floats free. The gasket outer diameter should be large enough so it doesn't fall out.
|
Re: gas cap gasket Thanks, just looking for a sealant or glue that I could use to secure it to the cap also.
|
Re: gas cap gasket It needs to float as not to tear turning it on and off.
|
Re: gas cap gasket If your gasket is old, shrunk up etc, maybe time to get a new one.
|
Re: gas cap gasket 1 Attachment(s)
Make a gasket from the flat side of an oil container. Oil containers are impervious to modern gasoline. Make the outside diameter of the gasket a snug fit into the cap.
|
Re: gas cap gasket I just use a large o ring
|
Re: gas cap gasket Make sure not to seal off the vent holes. I made that mistake once.
|
Re: gas cap gasket Thanks everyone for your responses.
|
All times are GMT -5. The time now is 10:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.