The Ford Barn - Model A Bolt ID

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Model A Bolt ID (https://www.fordbarn.com/forum/showthread.php?t=302881)

WRA	08-23-2021 01:57 PM

Model A Bolt ID

1 Attachment(s)

Trying to identify these bolts, they were mixed in with some T stuff I had

Attachment 471302

wrndln

08-23-2021 02:02 PM

Re: Model A Bolt ID

They are runningboard bolts that fit in the slots of the runningboard spacers to fasten the runningboards to the runningboard brackets.

slatgrille

08-23-2021 08:41 PM

Re: Model A Bolt ID

Wow....I spent some time today trying to figure out the package of bolts I ordered for the running boards and fenders. I was just about to start researching what goes where when I saw this posting. My question has been answered from this thread! Talk about coincidence.....

(Now to figure where all the carriage bolts go and the bolts with small but deep hex heads.)

Craig

gdmn852

08-23-2021 11:02 PM

Re: Model A Bolt ID

Hello the small but deep bolts may be for the running board splash shield to frame. There are 2 at the extreme end of the shield to frame. They are 1/4 20 if I remember correctly.

All times are GMT -5. The time now is 06:40 AM.