The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   36 rumble seat hinge installation (https://www.fordbarn.com/forum/showthread.php?t=291778)

Jimmyc 12-18-2020 04:47 PM

36 rumble seat hinge installation
 

The hinges are asymmetrical. How do they go on the rumble lid. Also, is there a pad between the dash and body? Getting ready to put this baby together.

Don Rogers 12-19-2020 08:37 AM

Re: 36 rumble seat hinge installation
 

4 Attachment(s)
Jimmy, Here are some photos of the rumble lid hinges in place and close up. The hinges should be marked with a part number as shown in several images. Part # 48-713570-B is the Right hand hinge and 48-713571 is the left hand..


Don Rogers

Don Rogers 12-19-2020 02:33 PM

Re: 36 rumble seat hinge installation
 

1 Attachment(s)
In answer to your second question regarding dash and body padding, there is a Front Belt Embossed Cardboard with trim. In 35 the cardboard was trimmed with Grey Brown Veal grain material and in 1936 it was trimmed with Brown Fine Colonial Grain Leaf.

DavidG 12-19-2020 03:22 PM

Re: 36 rumble seat hinge installation
 

Phaeton and roadster only, right, Don?

Don Rogers 12-19-2020 04:44 PM

Re: 36 rumble seat hinge installation
 

Yes


All times are GMT -5. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.