Dana 44 rear/1953/56 f-100
 

Anyone know who makes gear sets for 1953/56 f-100 dana 44 rear , looking to go from the standard 392.1 to A 354.1 ,not sure what spline is maybe 19. thanks

Re: Dana 44 rear/1953/56 f-100
 

I have a set of 3.30's for one if your intrested. Tim

Re: Dana 44 rear/1953/56 f-100
 

This place should have what you need.

Sal

https://www.drivetrainspecialists.com/

Re: Dana 44 rear/1953/56 f-100
 

Randy's Ring & Pinion (https://www.randysworldwide.com/) has all the parts you'll need, including the carrier and special spider gears.

Re: Dana 44 rear/1953/56 f-100
 

I used Randy’s on our 52 F1 Dana 44 3.54 rebuild, good parts. I had to use their flange to fit the pinion but the stock driveshaft fit fine. It runs strong and no issues on the hills around here with that combo.

JB

Re: Dana 44 rear/1953/56 f-100
 

Kaiserjeepwilleys parts in Aiken South Carolina. I got my 48 F1 Dana 41 parts from them. They also have Dana44. Great service & great price’s.